| |
» Energy Savings from Synthetic Lubricants
» Causes of Poor Gear Reducer Lubrication
» Lube Trivia: 3 Types of Polar Additives
» Case Study: Gearbox Bearing Failure Lube-Related |
 |
Energy Savings from Synthetic Lubricants |
|
Many synthetic lubricants offer one benefit that mineral-based lubricants typically do not. Energy savings due to the lower frictional characteristics of certain synthetics can be found to be as high as 5-10 percent.
Join us for Machinery Lubrication Level I training in Houston, Texas on January 26-28.
|
|
Complimentary Sample of Oil Eater Cleaner Degreaser
This unique non-flammable cleaner is water-based, fresh scented and biodegradable. It contains no acids, abrasive or petroleum solvents and is USDA approved for non-food areas.
Request a sample |
|
|
Causes of Poor Gear Reducer Lubrication |
|
Items from the gear reducer standards in "Preventive Maintenance and Condition Monitoring Standards".
Too high oil temperature may form ineffective oil films and destroy seals. Too low oil temperature may thicken oil and restrict flow, thus some parts of reducer may not receive lubricant. Water in oil increases friction on wear surfaces. Foaming of oil may cause insufficient lubrication.
Read more about
"Preventive Maintenance and Condition Monitoring Standards" |
|
Lubrication Fundamentals Training
Noria's "Introduction to Lubrication Fundamentals" training DVD teaches lubrication basics through high-quality animation and video. DVD training makes learning fun and convenient while helping employers provide standardized training for every employee, every time.
See Previews Online |
|
|
Lube Trivia: |
|
Test your knowledge and prepare for ICML lubrication or oil analysis certification.
Question: Name three types of polar additives.
Get the answer. |
|
Case Study: Gearbox Bearing Failure Lube-Related |
|
In this case study, the vibration data acquired on a small helical gearbox indicated symptoms consistent with impending bearing failure. This article describes the vibration pattern that helped to identify the problem as lubrication-related.
Read the article ...
|
|
563 Ready-to-Use PM Tasks
Use these condition monitoring standards and PM tasks as building blocks for your preventive maintenance program. Nearly 100 machines and components covered. Includes detailed task instructions and description of why each task is important.
PM Tasks and Condition Monitoring Standards |
|
|
White Papers |
|
|
Noria Training Calendar |
|
|
|
|
